Piergiacomi MMP-15 components cutter

PGMMP15
Slechts
Bestel
  • Beschrijving
  • Meer

The MMP 15 is a pedal-controlled pneumatic machine designed for cutting the terminals of loose radial components, capable of producing 3000 pieces per hour.

Compressed air 6 bar

Cutting plate 51x93 mm

Suitable for cutting transistors, LEDs, capacitors, resistors, etc. Similar to MMP 10 but with a larger run and working area size. On the 3 mm cutting plate and on the additional jig supplied, there are holes where the operator will have to insert the components to be cut. The jig increases the cutting length by 1.5 mm and can be used for a wide variety of components with a pitch of 1.27 and multiples thereof. The diameter of the component leads that the machine is able to cut goes from 0.3 to 1.3 mm for a maximum number of 60 leads at the same time. It can cut diameters of up to 2.5 mm with a customized jig. 2.54 mm pitch. Pedal activation.