The V-One ships with everything you need to get started, but as you use the V-One you'll want to pick up some of the following items.

Voltera Nozzles 225 micron

Slechts

Keep printing with a pack of 4 nozzles (225 micron inner diameter). These dispensing tips come standard with the V-One and are required for accurate deposition of ink and solder paste.

Bestel

Voltera Nozzles 150 micron

Slechts

If you want to push the resolution limits of the V-One, these dispensing tips will help enable your experimental projects. This pack contains 4 extra fine nozzles with an internal diameter of 0.150 mm (6 mil).

Bestel

Voltera Nozzles 100 micron

Slechts

Looking to dispense materials with a lower viscosity?  These are the nozzles for you.  Don't use this with our standard ink or solder paste... that will result in poor performance.

This pack contains 4 extra fine nozzles with an internal diameter of 0.100 mm (4 mil)

Bestel

Voltera Burnishing Pads

Slechts

After your circuit is printed and cured, the silver traces need a quick burnishing step to remove organic matter. The burnishing pad contains micro­pores that can remove even the smallest contaminants. Just give the board a scrub and watch the traces turn silver.

Bestel

Voltera Hello World Component Kit

Slechts

The Hello World circuit is the first circuit you print with your V-One. Have more than one person using your V-One? Then you might want more Hello World kits!

The Hello World kit contains:
6 x Green LEDs
3 x 47k Resistors
3 x 180R Resistors
3 x 100k Resistors
3 x 4.7UF Capacitor
1 x 555 timer
1 x 9V battery

Bestel

Voltera Empty Clear Cartridge Pack

Nu slechts

Get creative and dispense your own fluids with this pack of cartridges.
The pack includes: 
4 – 5cc Syringe Barrels
4 – Pistons 
4 – Tip Caps 
4 – End Caps 
2 – Female to Female Luer couplers

Bestel

Voltera Empty UV-Blocking Cartridge Pack

Slechts

Need to dispense your own UV sensitive fluids (up to 550nm)? 
The pack includes:
4 – 5cc UV-Blocking Syringe Barrels
4 – Pistons
4 – Tip Caps
4 – End Caps
2 – Female to Female Luer couplers

Bestel

Voltera Thumbscrews

Slechts

Pack of 4 thumbscrews attach board clamps to the V­-One printing platform and ensure your board is securely mounted. Be sure to get them here should you need replacements.

Bestel

Voltera Reference Rulers

Slechts

A handy reference for any PCB designer that reminds you of all those standard package and trace sizes. We know there are too many to remember!

Bestel

Voltera PCB Clamps, set of 2

Slechts
V­-One custom board clamps are required to mount your board onto the printing platform. Both Voltera provided printing substrates and pre­fabricated circuit boards can be mounted using our board clamps.
Set of 2
Bestel