Een compleet systeem voor reiniging, neutralisatie en onderhoud van een goed functionerende ESD vloer.

Ook bieden wij een slijtvaste vloercoating, om uw kale betonvloer af te werken of coatingvloer te repareren.

Floor Stripper

Dewaxing alkaline detergent have to be used the first time, before applying the coating on the floor. It removes quickly multiple coats of wax and embedded dirt. It is suitable on PVC, rubber and hard floors.

Biodegradable: 90%
Dilution in water: 5 - 10% machine stripping, 12 - 16% manual stripping

Lay off the solution and left it act for 5 minutes, then wash with water.

Floor stripper, 5Kg unit

Floor Detergent

Low foaming-agent detergent with highly concentrated active substances and alkalinity.
It is used for cleaning and maintenance of the waxed surface.

Biodegradable: up to over 90%
Dilution in water
: 1 - 5%

It may be used to wash by hand and with a one-brush polisher or a washing-drying machine.

Detergent, 5Kg unit

Floor Coating


It gives dissipative characteristics to a standard floor, and it is excellent in maintaining the conductive floor in operating rooms, clean rooms and data processing centres. It may also be used to mantain the table mat's dissipative surfaces.

Rs < 10^11 Ω

First treatment
- well wash the floor with the stripper.
- rinse with clean water.
- when dry apply two thin coats on the floor
  (yield: 1lt for approx. 25)

General maintenance
- sweep the floor with a wet broom, then wash it with the cleaner diluted in water at 1-5% ratio

Maintenance with spray
- Dilute the coat in water at 30% ratio, spray it on the floor and then polish by a one brush machine, provided with a suitable scotch-bride (yield: 1lt for approx 100m²)

Liquid coating, 5Kg unit


Dissipative floor paint

ELECTROGUARD 30 is a two pack water based epoxy coating which can be simply applied to existing concrete floors without the need for specialist flooring contractors.
It is normally applied with two coats by brush or roller.

Electroguard 30 has an attractive sating gloss finish, easy to clean and is available in grey colour.

Yield: aprox. 8/litre
Surface resistivity: 10^9 Ω
Resistance to ground: 10^9 Ω
Conforms to EN 100015-1

7805.853: ELECTROGUARD 30 medium gray, 5 litres unit (4 litres base, 1 litre activator)

7805.856: FLOORPOX EPOXY PRIMER for bare concrete floor 12 litre unit (6 litres base + 6 litres activator) - Number of coats: 2 - Yield: approx. 16m²/litre